Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: powergrid and promag44

  1. #1
    sune Guest

    Default powergrid and promag44

    Hi

    I have a blown TFX hemi with a 44 promag and a 8147 box. I tried installing a powergrid to be able to 2 step the engine etc.

    But When i try to run the engine with the powergird connected it is unable to run decently, it stumbles and rpm goes up and down. If I disconnect the powergrid the engine runs like normal.

    Is it not possible to run an ignition like mine with the powergrid or what gives?

  2. #2
    msdtech1955 Guest

    Default

    check the general setting first.

    reep general settings.jpg

    reep main timing.jpg

    reep1.jpg

  3. #3
    msdtech1955 Guest

    Default

    also make sure the black wire is grounded and the orange is connected to the battery...plus...the heads grounded...

    powergrid to promag 2011.jpg

    FLOATING GROUND1.JPG

  4. #4
    sune Guest

    Default

    Thank you for a quick responds.

    I forgot to mention i am running without a crank trigger. getting the signal directly from the promag44 generator.

    Both the heads are grounded like the diagram.

    And the settings seem correct.

    Could it be because i run without a crank trigger?

  5. #5
    msdtech1955 Guest

    Default

    Could it be because i run without a crank trigger
    it would work with just the generator also ...


    using any retard?

  6. #6
    sune Guest

    Default

    No retards yet, only the limters this was the first time we tried it, we had to disconnect it to just get it to run.

  7. #7
    sune Guest

    Default

    So anyone got an idear what the problem is ?

  8. #8
    msdtech1955 Guest

    Default

    get your laptop up and ready and call us...


    we need to see the files from the grid .

  9. #9
    sune Guest

    Default

    There are no recordings on the sd card I just checked, Can i upload the user data somewhere? If at all posible i would like to sort this via mail as i live in Denmark

  10. #10
    sune Guest

    Default

    Quote Originally Posted by FooxNulp View Post
    I think, that you are not right. I am assured. Write to me in PM, we will talk.
    email sent

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us