Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 41

Thread: 6AL-2 Programmable 6530 LED flash.

  1. #11
    droww Guest

    Default

    I know, I should have been OK with ground I had. We'll find out. I'm just going to temporarily go straight to battery to rule out things.

  2. #12
    msdtech1955 Guest

    Default

    sounds like a smart idea.

  3. #13
    droww Guest

    Default

    I ran 12ga wire to both pos and neg sides of battery straight to the 6al-2.
    Still flashes twice then goes off. Measuring 12.12 volts at the box.

  4. #14
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    1,589

    Default

    Maybe you have damaged the box with a poor ground.:sad:
    Regards, Gary

  5. #15
    droww Guest

    Default

    This is a box that I returned and there was supposedly nothing wrong with it.
    I feel the ground it was hooked to was fine. It's the same gnd I used with my old ignition for 8 years. I'm going to put my other box back in and see what happens.

  6. #16
    droww Guest

    Default

    I just got done temporarily putting the crane Hi-6 box in. The car fired right up, forgot how good it sounded. And I used the same old ground I was using forever and with the msd box
    Anyways a little pis**ed that I returned this MSD box and was told its fine to only pull my hair trying to figure out what else is wrong. Now what????? Return it again? Pay more?

  7. #17
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    1,589

    Default

    It does seem your MSD is faulty.
    Regards, Gary

  8. #18
    msdtech1955 Guest

    Default

    p/m me a daytime phone number....

  9. #19
    droww Guest

    Default

    Your inbox is now full

    I had a typo in the first message when typing my phone number.
    In the number change the second "4" to a "3"

  10. #20
    msdtech1955 Guest

    Default

    will call you today

Page 2 of 5 FirstFirst 1234 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us