6AL-2 Programmable 6530 LED flash.

[droww]

I know, I should have been OK with ground I had. We'll find out. I'm just going to temporarily go straight to battery to rule out things.

[msdtech1955]

sounds like a smart idea.

[droww]

I ran 12ga wire to both pos and neg sides of battery straight to the 6al-2.
Still flashes twice then goes off. Measuring 12.12 volts at the box.

[Gaz64]

Maybe you have damaged the box with a poor ground.:sad:

[droww]

This is a box that I returned and there was supposedly nothing wrong with it.
I feel the ground it was hooked to was fine. It's the same gnd I used with my old ignition for 8 years. I'm going to put my other box back in and see what happens.

[droww]

I just got done temporarily putting the crane Hi-6 box in. The car fired right up, forgot how good it sounded. And I used the same old ground I was using forever and with the msd box
Anyways a little pis**ed that I returned this MSD box and was told its fine to only pull my hair trying to figure out what else is wrong. Now what????? Return it again? Pay more?

[Gaz64]

It does seem your MSD is faulty.

[msdtech1955]

p/m me a daytime phone number....

[droww]

Your inbox is now full

I had a typo in the first message when typing my phone number.
In the number change the second "4" to a "3"

[msdtech1955]

will call you today