Results 1 to 2 of 2

Thread: 4217,8204 & hall effects pickup

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    stpltn250r Guest

    Default 4217,8204 & hall effects pickup

    I'm running an MSD 4217 single cylinder. The coil is a MSD 8204. I'm running B9egv plugs. MSD 8.5 wires. Ignition is on 10amp fuse. Running 18v battery.

    It ran fine for a couple months. So we took a 6hr trip to run this bike. Ran fan friday night. On Saturday, it saws a different story.

    It would idle fine. But ad soon as the motor would rev up it would lose spark and then kick back in. Backfire out the pipe. Then the ignition died. Tested the coil. Ohms checked on the coil at 1.0. Power was going into the 4217 box. Power checked good at the pickup. When I ohm'd out the pickup it was at 9. I checked and installed a new on and it read 0. The LED went out on the box to show it was sensing a signal at the pickup.

    Do I need to run a resistor plug with this ignition?
    Would vibration make the box go out?
    What's the max voltage? (18v should not be too much?
    (There another guy with the same set up I have and his has ran for over two years)



    You guys really need to include some trouble shooting in the directions of the 4217. Spending 5 hours on a Saturday at the races and not knowing the specs on a box is not what I call a fun weekend.

    Please get back with me.

  2. #2
    stpltn250r Guest

    Default

    Thanks for the email Brett. I will call you shortly.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us