Results 1 to 10 of 21

Thread: MSD Boost controller help

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default MSD Boost controller help

    I recently installed an MSD boost controller on my race car. The engine is a 4 cylinder turbo making approx 575hp. I have went to my local track to try and get some data and get the PID values correct. I am real new to this PID stuff and was hoping someone could take a look at my ACQ file and give me some pointers. PWM is swinging from one end to the other at 40 and 159 and boost is all over the place.

    This run was with the PID at 40, 40 and 40.
    Attached Files Attached Files

  2. #2
    msdtech21 Guest

    Default

    I dont really know whats going on but there's no usable data in that run.

    Boost controller bad run.JPG

  3. #3
    msdtech1955 Guest

    Default

    what is your set-up ?

  4. #4

    Default

    Attached is my latest ACQ file.

    It is keeping boost down right around 26-27psi but the target is 32-33.

    What I don't understand is why the PWM is 159. If boost is below target, PWM should be like 40 correct?

    Also, I do not have RPM registering, should it be? Is that one of my problems? I can hear the solenoids clicking when I rev up the engine.

    PID was 30-15-10. With PID at 30-15-0 it was overboosting to 38psi the whole way.

    HELP!
    Attached Files Attached Files

  5. #5
    msdtech1955 Guest

    Default

    just got back in , will look at it today .

  6. #6

    Default

    Any luck looking at the file?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us