Results 1 to 2 of 2

Thread: 4217 Single Cyl Question

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    xerospeed Guest

    Default 4217 Single Cyl Question

    Hey, I am interested in using the 4217 Single Cylinder Programmable ignition on my 1993 Yamaha WR500 Dirtbike engine. It uses a pretty standard ignition magneto with pulser coil to tell the cdi to fire the coil.

    Can I just send the signal from the pulser-coil to the 4217 as my reference, or do i need to setup some different form of pickup?

    Thanks
    mike

  2. #2

    Default

    The 4217 ignition will work with a two wire mag pickup or a Hall Effect trigger system. As long as your Yamaha is equipped with a two wire pickup you can connect the stock pickup wires to the violet and green wire coming from the 4217 unit. Remember this unit is not pre programmed for your engine you will need to use the supplied software to set up the ignition for your application.

    Thank you
    Ray

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us