Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Is the EFI section dead???

  1. #11
    yard351 Guest

    Default

    Tried to start it today, no spark. The points wire doesn't seem to be triggering the 6AL. It's set up for mag pick up but it's not doing the trick. Is there anything else I need to look at?

  2. #12
    yard351 Guest

    Default

    I called MSD tech support yesterday and they told me to contact Painless wiring. Painless told me that I must have talked to someone new at MSD. They don't support the Blaster EFI. Starting to feel like I'm still running dirt cars.

  3. #13
    yard351 Guest

    Default

    got it up and running. The efi unit was powered with a sourse the dropped during cranking. The only issue I havs is with the spark tables. I had to run alot of timing to get it running. 30 deg. at idle and 60 at full advance. In the data logger it doesn't match the spark tables. It says 41deg total advance. Still playing with it though.

  4. #14
    msdtech1955 Guest

    Default

    any updates

  5. #15
    yard351 Guest

    Default

    Do you service the MSD 2450? My can't communicate with it. My alternater field and stator wires got swapped when the new one was installed and hasn't worked since. I don't know if the tune was efficted or not. I took it to the track and lifted the heads at the 330 and coasted through the eigth at 7.80. I hope you can help.

    Thanks,
    Yard

  6. #16
    msdtech1955 Guest

    Default

    unfortunately not, the last run of those was 2009.

    and "ALL the parts and harnesses are gone.

  7. #17
    yard351 Guest

    Default

    I bought a BS3 system and MSD crank trigger. I would like to use the distributor as a cam sensor. Can I remove all but the no.1 tooth from the reluctor wheel and make it work?

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us