Fuel Pressure Problems

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fuel Pressure Problems


    I have a p/n 0-80770 Avenger carb and use the Holley blue street/strip fuel pump. Using the regulator that came with the blue pump I cannot get fuel pressure regulated. Screwed all the way down, pressure is 13lb and with adjustment screw all the way up pressure is 11lb's. I only need 5 to 7 lbs. Any suggestions from anyone???
  • Danny Cabral
    Administrator
    • Dec 2009
    • 35959

    #2
    Fuel system debris probably found it's way into the diaphragm and now it can't seal as well (regulate).
    If this is a return style regulator, make sure there isn't a restriction in the return line, back to the tank.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, Eagle 3.470" forged steel crankshaft & H-beam rods, Wiseco 4.200" forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232°-244° duration/.623" lift/114° LSA H/R camshaft, Trick Flow R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes SS dual 2.5" exhaust, SS off-road X-pipe, SS shorty headers, OEM smog pump converted vacuum pump, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, highly modified Ford 4R70W transmission, FTI 9.5"/3000 stall/triple disc TCC, B&M Hammer shifter, Stifflers trans crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.73 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

    Comment

    Working...
    X