Results 1 to 2 of 2

Thread: 8969 rpm window switch and servo

  1. #1
    sonicdave Guest

    Default 8969 rpm window switch and servo

    I have a power valve servo that I need to open at 6000 rpm and close at 5800rpm.Will the 8969 work with this? Do I connect the yellow to one side of the servo and the grey to the other?

  2. #2


    Hello Dave,

    You can use the 8969 as long as your ignition system is inductive… meaning that you have 12 volts present at the coils when the ignition key switch is in the ON position, you’ll need a voltmeter to verify this.

    Once you verify 12 volts at the coils this is how the wiring will look on an inductive ignition system.

    Red to Switch 12 volts
    Black to Ground
    Yellow to what ever you are activating
    White to Negative side of coil
    Grey will not be used.

    Post me back if you need additional information.
    Thank you, Markel.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us