Results 1 to 2 of 2

Thread: How Close Is To Close

  1. #1
    eddsr Guest

    Cool How Close Is To Close

    Installed Dig 7 75301 With crank trigger had to fab senser bracket for the lack of room for supplied one. Have a 540 BBchevy in funny car chasis.Running a 16v altenater mounted passenger side even with oil pan driver side is alky fuel pump also running electric water pump mounted in stock location. Senser for crank trigger is located just between the two 7\16 bolts (driver side) . Now to run wires, how close is to close for senser wires to be ? To Alt ? Alt output wire ? Water Pump ? Water Pump Wires ? Battery Cable ? Starter ? Coil Wiring ? As you can figer they ain't to much room. I can send Pictures. eddsr

  2. #2
    Eric David Bru Guest

    Cool

    Keep the crank trigger wires as far away as you can and if you do need to run them near other wires do not run them parallel, run them perpendicular.

    You should also add a line filter to your power wires PN 8830.

    Post up some picts.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us