Results 1 to 1 of 1

Thread: I am trying to set up a Model 4010... does it have a

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    M.T. Guest

    Default I am trying to set up a Model 4010... does it have a

    Setting up a model 4010 #84020 on a 350 Chevy 4x4 engine. Being its a 600 cfm I know its a bit small but the engine seems to like it just fine. The carb body is a bit different than I'm used to being the bowls are attached to the carb body. I have a few questions for those who know these carbs. First off are they basically the same carb as the traditional Holley carb body style? Are they old enough that they are Pre Ported Spark Vacuum? And if not which nozzle is it? Second, do they get set up like most Holley's? I set the Accelerator Pump Linkage up at .015" clearance. Idle seems a bit rough but haven't put the vacuum gauge to it yet. Any insight to the uniqueness of this carb would be appreciated. Just curious what the thought was for the design and what market they were designed for?
    Last edited by M.T.; 09-20-2012 at 01:34 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us