Results 1 to 2 of 2

Thread: MC-3 on a quartermidget?

  1. #1
    kbbodine Guest

    Default MC-3 on a quartermidget?

    I am interested in the MC-3 or MC-4 ignition to be used on a single cylinder Deco quarter midget engine. Would be using it with a magnetic trigger pickup off of the flywheel and the "Pro Coil PN 8232" Currently using the "Small Engine Controller" ignition. Will the MC-3 or MC-4 ignitions work for this application? Is there any disadvantage to running the MC ignition?

    Thanks for your help, Kevin

  2. #2

    Default

    The MC-3 and MC-4 will not trigger off your magnetic trigger pickup. These unit trigger off a Hall Efect trigger. If you do not need any timing control the MC-3 would be the unit to use. You will need to run a good 12 volt battery.

    Thank you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us