Results 1 to 3 of 3

Thread: Small Engine Controller

  1. #1
    jimb Guest

    Default Help!

    I'm using the MSD small engine controller. The light comes on and stays red but theres no spark.

  2. #2
    msdtech16 Guest

    Default

    please post in the " powersports trouble shooting" section of this forum.

  3. #3

    Default

    If you have checked all your wires and there are no problems with incorrect wiring and no damaged wires there are two possibilities. Your ignition is not putting a spark out or you have a bad coil. You can check the coils with a multi meter the reading should be primary 1.2 ohms and secondary less the 2000 ohms. If you have any problems performing this test you can sent the unit in for testing.

    Thank you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us