Results 1 to 3 of 3

Thread: No start

  1. #1
    meyer30 Guest

    Default No start

    I was going over the troubleshooting and I can't figure it out. It shows a red led for the RPM and says "stall". What does that mean? Does not show that anywhere in the manual. Also the oil and fuel pressure are not available yet but there is no where in the program to put no sensor for those two, so they read error since there is no signal. What can I do about that? Thanks.

  2. #2
    Join Date
    Dec 2009


    Quote Originally Posted by meyer30 View Post
    It shows a red led for the RPM and says "stall". What does that mean?
    It seems you're not getting an RPM signal. Check that your ignition type & parameters are entered correctly.
    Nothing else is required for the fuel & oil pressure sensors until you install them.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3


    As Danny said, the ECU is not seeing any signal or you have it configured improperly.

    Not having the oil or fuel pressure sensors causes no issues. You just get a message that they are not connected.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us