Page 12 of 13 FirstFirst ... 210111213 LastLast
Results 111 to 120 of 127

Thread: ECU Connectors & Terminals - Holley EFI

  1. #111
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    18,685

    Default

    Not necessarily, thanks for the information. I see the 2-pin CTS male connector (LINK).
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  2. #112

    Default

    Just for information, I don't know if anyone has posted it. Casper's Electronics sells the mate for the TPS:
    http://www.casperselectronics.com/ca...&search=410027

  3. #113
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    18,685

    Default

    Yeah, I've posted that HERE.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  4. #114

    Default

    OK just checking. I've used that connector four times so far. Works great for extending transducer harnesses, and for hooking Ford TPS to the factory Holley harness.

  5. #115

    Default

    What's the part number for the Holley Smart Coil wiring harness pins?

  6. #116
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    18,685

    Default

    Delphi Metri-Pack 150.2 Connector/Terminals: http://www.powerandsignal.com/docs/D...%20Catalog.pdf (Delphi Connector Catalog - Page 2.22)
    The Delphi Metri-Pack 150.2 terminals have a flag for the slotted connectors.
    #12124075 16/18 AWG (1.0-0.80 mm²) Metri-Pack 150.2 "Pull-To-Seat" terminals.
    #12124076 20/22 AWG (0.50-0.35 mm²) Metri-Pack 150.2 "Pull-To-Seat" terminals.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  7. #117

    Default

    Thanks Danny.

  8. #118
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    18,685

    Default

    You're welcome.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  9. #119

    Default

    Looking for the connector/pins for the I/O Adapter Harness for the Holley Digital Dash. PN 558-432 is the adapter I bought. Didn't want to buy the whole harness when I don't need, but a few of the inputs/outputs. Any help would be appreciated.

  10. #120
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    18,685

    Default

    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us