Page 14 of 16 FirstFirst ... 41213141516 LastLast
Results 131 to 140 of 151

Thread: ECU Connectors & Terminals - Holley EFI

  1. #131
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,973

    Default

    That Delphi Metri-Pack 150 three cavity connector is found on page 2.13:
    http://www.powerandsignal.com/docs/D...%20Catalog.pdf (Delphi Connection Systems Catalog - Page 2.13)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  2. #132

    Default

    Perfect. Thank you.

  3. #133
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,973

    Default

    You're welcome.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  4. #134
    Join Date
    Oct 2018
    Location
    Portland, Oregon
    Posts
    17

    Default

    Quote Originally Posted by RLMeskimen View Post
    Danny, sorry for the delay.
    Does this help? https://www.electricalhub.com/delphi...SABEgKdrvD_BwE
    - Joe Since 1970
    Follow me on StumptownBenz.com

  5. #135

    Default

    Thanks Joe. Yep, takes me to the male which is what I was looking for. https://www.electricalhub.com/delphi...pack-connector

  6. #136

    Default

    Danny, great very helpful thread. For my RAMJET 350 project I'm starting with the unterminated harness, as I'm doing everything very clean and minimal with direct wiring to eliminate the in between universal connections for injectors, ignition, etc. For the GM small cap ICM I believe this would be the right Metri-Pack 150 connector, do you agree? 12162188. Also, I take it you would recommend, since I have my choice just using the Metri-Pack 150 for all the TPS, IAC, etc. vs GT150? Thanks.

  7. #137
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,973

    Default

    Quote Originally Posted by alan91z28 View Post
    Danny, great very helpful thread.
    Thank you & you're welcome.

    ...do you agree? 12162188.
    Yes, same as the IAC connector (LINK). And a coolant temperature sensor pigtail connector is used for the GM HEI distributor's coil wiring (LINK).
    http://documents.holley.com/techlibr...10555rev17.pdf (Holley EFI Wiring Manual - Figure 3/4, Page 13)
    https://www.holley.com/products/fuel.../parts/558-304 (Holley 558-304 GM HEI Ignition Adapter)
    https://forums.holley.com/showthread...5889#post45889 (Additional Information)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  8. #138

    Default

    Sorry for a simplistic question. My question revolves around he Delphi 150.2 5-wire Connector (part numbers 12162825 & 12124075) that are used in the Holley big wire Smart Coil kit. I know that Delphi markets them as "waterproof", but in my application (very tight engine bay) I'd like to mount the coils with the terminal side down and the connector up, so I wonder just how waterproof they really are? Anyone here know for certain? My concern revolves around the fact that I'm not running a hood.

  9. #139

    Default

    Just in case anyone else loses their 553-100 or 553-101 pigtail or messes up a connector etc., the connector for the gauge can be bought from Digi-Key part number is A31109-ND. Holley no longer offers these gauges or parts for them. Hope I can save someone the hour or two it took me to find this. https://www.digikey.com/products/en?keywords=A31109-ND

  10. #140

    Default

    Does Holley offer preterminated wiring for the P1A connector? I'm having a hard time accepting the idea of purchasing a $350+ tool for the minimal pins that I need to add to the connector. I did a test crimp with a crimper that I have that works well for most all applications and it seems to leave the pins slightly loose.

Page 14 of 16 FirstFirst ... 41213141516 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us