Page 10 of 10 FirstFirst ... 8910
Results 91 to 97 of 97

Thread: ECU Connectors & Terminals - Holley EFI

  1. #91
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    15,586

    Default

    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  2. #92

    Default

    I want to move the fuel pressure transducer, looking for terminals. Not sure if it's the same as TPS?

  3. #93
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    15,586

    Default

    Yes, it's the same. See post #19.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  4. #94

    Default

    Danny, is 12124076 the correct terminal for Holley fuel pressure transducer? I believe 12124075 is terminal for CTS.

  5. #95
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    15,586

    Default

    Quote Originally Posted by prostreet1967 View Post
    Danny, is 12124076 the correct terminal for Holley fuel pressure transducer?
    The Metri-Pack 150 sensor connector (TPS, MAP, A/C, Fuel & Oil) is not a Metri-Pack Series 150.2 connector body (LINK).
    #12103881 16/18 AWG (1.0-0.80 mm²) Metri-Pack 150 "Pull-To-Seat" terminals.
    #12089290 20/22 AWG (0.50-0.35 mm²) Metri-Pack 150 "Pull-To-Seat" terminals.
    The Delphi Metri-Pack 150.2 terminals have a flag for the newer slotted connectors (flat connectors, not round like TPS).

    I believe 12124075 is terminal for CTS.
    The Delphi Metri-Pack 150.2 terminal part numbers you listed are the same, just for different AWG wire. See post #8.
    Yes, the #12124075 & #12124076 are for the Metri-Pack 150.2 CTS, MAT/IAT & flat 4-pin IAC connectors.
    #12124075 16/18 AWG (1.0-0.80 mm²) Metri-Pack 150.2 "Pull-To-Seat" terminals.
    #12124076 20/22 AWG (0.50-0.35 mm²) Metri-Pack 150.2 "Pull-To-Seat" terminals.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  6. #96

    Default

    Thanks for clarification. I appreciate your help.

  7. #97
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    15,586

    Default

    You're welcome.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us