Page 17 of 17 FirstFirst ... 7151617
Results 161 to 166 of 166

Thread: ECU Connectors & Terminals - Holley EFI

  1. #161

    Default

    Is there a part number for the white I/O connector for the back of the Digital Dash?

  2. #162
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    26,791

    Default

    I'd have to see it, but that might be a tough one. Holley does sell the I/O Adapter & Terminated Vehicle Harness Kits:
    https://www.holley.com/brands/holley.../lcd_displays/ (Digital Dash, I/O Adapter & Vehicle Harness Kits - Scroll Down)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  3. #163

    Default

    I found out the fuel level harness from Tick Performance comes with the white connector, and then you can add additional I/Os from there.

  4. #164
    Join Date
    Jun 2016
    Location
    Prairieville, LA
    Posts
    24

    Default

    Quote Originally Posted by Daskoby View Post
    Is there a part number for the white I/O connector for the back of the Digital Dash?
    Quote Originally Posted by Danny Cabral View Post
    I'd have to see it, but that might be a tough one. Holley does sell the I/O Adapter & Terminated Vehicle Harness Kits:
    https://www.holley.com/brands/holley.../lcd_displays/ (Digital Dash, I/O Adapter & Vehicle Harness Kits - Scroll Down)
    Quote Originally Posted by Daskoby View Post
    I found out the fuel level harness from Tick Performance comes with the white connector, and then you can add additional I/Os from there.

    EDIT: It’s a Molex wire to board connector and I’m trying to determine the specifics of it.


    Danny, I also seek this information. Which pins are needed to terminate the connector in this picture? It is also used to terminate the CAN connectors that connect to the dash, if that helps.
    Untitled by girouard82, on Flickr
    Last edited by White95; 10-04-2020 at 03:35 PM.

  5. #165
    Join Date
    Jun 2016
    Location
    Prairieville, LA
    Posts
    24

    Default

    More pictures of the aforementioned connector:
    Untitled by girouard82, on Flickr
    Untitled by girouard82, on Flickr
    Untitled by girouard82, on Flickr
    Untitled by girouard82, on Flickr

  6. #166

    Default

    I have LSx coil sub-harness P/N 558-321. Is there an extension harness available to connect to the main harness?

Page 17 of 17 FirstFirst ... 7151617

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us