Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: C950 22S issues

  1. #11


    The narrow band sensor that comes with the C950 can only run closed loop to a 14.7:1 air/fuel ratio. If you want it to run richer you have two choices:
    1) Operate it open loop with the narrowband sensor which is fine.
    2) Purchase the wideband kit and run closed loop to any air/fuel ratio you want.

  2. #12
    exocaged Guest


    You can force it to run rich by raising the fuel map numbers so it can't take away everything. If I let the O2 run the idle it will not run. I do however, have the O2 working well under normal driving conditions. As in it's doing it's job. I have however had to raise the upper end to 180 under full throttle it goes instead of stumbling or starving. This however gives a large red portion of the map in the upper right corner. Seems to work OK though.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us