Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Dakota Digital Oil Pressure

  1. #11

    Default

    Use their sender and input the sender output data into the Dominator Sensors ICF, so it will read correctly. Andrew

  2. #12

    Default

    I have two vehicles in the shop right now with the exact same issue. Both have the Holley BIM module. One has HDX gauges and the other has VHX gauges. On both everything works except the oil pressure.

  3. #13

    Default

    Glad to know I'm not crazy, here! At least as far as this goes, anyway. :-) They've sent me an updated BIM that is supposed to provide some output regarding what the BIM is actually seeing. That is, the LCD is supposed to show a different code for the oil pressure that it's reading off the CAN Bus. I think the intent is to try to isolate whether it's a problem with the BIM or a problem with the gauges.

    Unfortunately, my car has been down for a few weeks with me replacing my rear main, and now it won't start. So I haven't been able to follow up with DD, or test what the module is reading. Hopefully I can get my car running soon and DD can figure out what the problem is.

    Quick update: Miraculously, the car is running today. I took a video of the output from the new BIM and sent it to DD. I'll keep you updated on what they say. Interestingly enough, it appeared to work correctly with one of the settings. Though it may have just been reading manifold pressure. I didn't double check the readings against the oil pressure shown in Holley software.
    Last edited by AU Doc; 01-14-2019 at 02:21 PM.

  4. #14

    Default

    DD says they have a fix and have tested it with a couple different cars. Here's hoping it works this time!!!

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us