Results 1 to 6 of 6

Thread: Converter dump solenoid control.

  1. #1

    Default Converter dump solenoid control.

    I'm trying to control my dump solenoids by time after the transbrake is released. It's a dual stage dump setup. I'd like both solenoids active/open while transbrake is active then able to control them separate by time. Essentially have the 1st stage go off say .4 after transbrake release, and 2nd stage 1.0 sec after release. Which is the best way to set this up in the ECU? Thanks.

  2. #2
    Join Date
    Nov 2014
    Location
    Ont. Canada
    Posts
    921

    Default

    In your Input/Outputs, use the time delay in the Configure section.

  3. #3

    Default

    That’s how I have it setup now, unless I’m missing something. But the timer is activated once the transbrake is active, I need the timer to start once it’s released.

  4. #4
    Join Date
    Nov 2014
    Location
    Ont. Canada
    Posts
    921

    Default

    Use the Switched Input Triggers.

  5. #5

    Default

    Correct, so I have Switched Input Triggers activating the output when transbrake is enabled. Now I want to deactivate the solenoids a set time after transbrake release. I don't see what will deactivate the output once it’s released.

  6. #6
    Join Date
    Nov 2014
    Location
    Ont. Canada
    Posts
    921

    Default

    Have it activate when the transbrake is disabled.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us