Results 1 to 6 of 6

Thread: Fuel

  1. #1

    Default Fuel

    Having trouble getting my car to run after installing Holley EFI Sniper system. I installed a new Holley fuel tank with fuel pump inside the tank. Car is getting spark and will start if I spray starting fluid. Do I need a fuel regulator? Is my fuel pressure too high? 1966 Ford Mustang with 302. Getting gas to the throttle body.
    Last edited by Brogers; 09-10-2018 at 08:30 PM.

  2. #2
    Join Date
    Oct 2017
    Location
    Los Angeles
    Posts
    254

    Default

    The fuel pressure regulator is already in the Sniper, you may have a faulty one. It's always possible. Do you have a fuel pressure gauge attached to your fuel feed line?

  3. #3
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    19,565

    Default

    Is the fuel pressure 58-60 psi (LINK)? https://forums.holley.com/showthread...8356#post88356 (Holley Sniper EFI Fuel Pressure Tester/Gauge)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, FRPP 3.31 gears, Moser 31 spline axles, Cobra Trac-Lok differential, 4-disc brakes/Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  4. #4

    Default

    I do not have a fuel pressure gauge, that's the next step today. Thanks for the replies, I'll let you know.

  5. #5

    Default

    Not sure what the issue was, however, it started up and is running fine. Thanks for the reply.

  6. #6

    Default

    Quote Originally Posted by Brogers View Post
    Not sure what the issue was, however, it started up and is running fine. Thanks for the reply.
    You need to prime the fuel pump six times (into a bucket) before hooking it up to the Sniper. Did you do that?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us