Results 1 to 3 of 3

Thread: Fuel gauge not working with new Sniper EFI Master Kit on '68 Dart.

  1. #1

    Default Fuel gauge not working with new Sniper EFI Master Kit on '68 Dart.

    Hello. I have installed a Holley Sniper EFI master kit (fuel tank & plumbing) on a '68 Dart. The fuel gauge is now not working. It was working previously. Wiring all looks good. I'm not sure the Ohm range for the Sniper in-tank sending unit, but is there something else I need to do to make this new fuel sender compatible with the OEM gauge? Thanks!

  2. #2


    I just looked at the '68 Dart wiring diagram. It's just a Dark Blue wire from the sender unit to the gauge. No funky special regulators (like in a Ford). So you need to measure the Ohms of the old sender.

  3. #3


    I took the fuel sender out of the old tank and tapped the lead into the existing wiring (dark blue wire from tank) and the gauge works. If I measure the rheostat range on the bench, it looks like approximately from 82-12. It looks like the Holley tank kit for the '68 Dart is a 73-10 ohm sender. I confirmed the ground and gauge lead are connected. Not sure what is up.
    Last edited by MorePwr; 07-04-2018 at 09:34 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us