Results 1 to 2 of 2

Thread: Knock Sensor

  1. #1

    Default Knock Sensor

    Hey all. I'm running HP EFI ECU on a 351W based engine. I want to install a knock sensor and wire it in to add some protection. Suggestions on what would be the easiest way to do this? LS type sensor? Where to install? Pin J1A-29 for signal, but just 12V from the ECU supply works? Thanks in advance.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    19,282

    Default

    Start by reading this: http://forums.holley.com/showthread....ors-Holley-EFI (Knock Sensor Wiring & Tuning)

    EFI Software Help Information/Instructions:
    ‒ On the top Toolbar, click "Help" & "Contents". This opens all Help topics.
    ‒ When navigating the software, click "Help ?", drag it to any parameter and click again.
    ..This automatically opens the definitions for that specific parameter.
    ‒ Tuning information can be read by clicking the F1 key, when you're viewing any screen.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us