Results 1 to 3 of 3

Thread: 4160 double pumper 750, does it need plugs?

  1. #1

    Default 4160 double pumper 750, does it need plugs?

    Hi. I'm installing a new 750 double pumper. On the passenger side of the bowl, I've fitted an AN fuel kit so it's all connected. But on the driver side it seems like the outlets from the Bowls are open? You could see all the way in. I looked inside and there's no thread at all to put in plugs. Should I leave or have should it be? Regards, Rob

  2. #2
    Join Date
    Nov 2014
    Location
    Ont. Canada
    Posts
    837

    Default

    If they're not threaded, you do not need a plug.

  3. #3

    Default

    Great, thanks. :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us