Results 1 to 3 of 3

Thread: HEI & factory tach won't work with Sniper.

  1. #1

    Default HEI & factory tach won't work with Sniper.

    I have a reproduction factory tachometer & HEI. Worked well before Sniper. Made an pigtail for the HEI terminal with two outputs. One for the Sniper yellow wire and one for the factory brown tach wire. Sniper would not fire with "Stall" on the display. Disconnected the factory tach, and Sniper fired up. What can I do to get the factory tach to work? Diode inline on one or both tach leads? Thank you!

  2. #2

    Default

    You have it wired wrong. Tach lead from the HEI should go to the yellow lead in the Sniper 7-pin connector. The dark brown lead from the Sniper 10-pin connector goes to your tach. Page 16 of the installation guide.

  3. #3
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    19,283

    Default

    See pages 16 & 17: http://documents.holley.com/199r11031r.pdf (Holley Sniper EFI Instruction Manual)
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us