Results 1 to 6 of 6

Thread: Sniper fires up, idles and then dies when warm.

  1. #1

    Default Sniper fires up, idles and then dies when warm.

    Just put a Sniper kit on an early Bronco 351W dual-plane intake. It starts when it's cold, on the other hand, as soon as I get it up to temp, shut it off & start it, it'll fire then suck a bunch of air through the IAC and either die or rev way up before settling down. Any help would be great, thanks.
    Last edited by Devo898; 02-23-2018 at 03:33 PM.

  2. #2


    Could you upload a datalog using Dropbox, so I can see what's happening to help you? Here are the instructions on recording a datalog:

  3. #3


    Any luck, I seem to be having the same problems.

  4. #4


    I can help you guys if you just upload a datalog of it happening, along with the global Config File.

  5. #5


    I haven't been able to upload a datalog, gonna buy a laptop soon. I had it wired up wrong, my key on wasn't hot while cranking, that definitely helped. The IAC does do some funny stuff every once in awhile. It opens way up while your putting along and the idle goes up to at least two grand.

  6. #6


    I'm not sure if you can do this through the 3.5" TSLCD, but to solve that issue of the IAC, try decreasing the "RPM Above Idle To Start Ramp". Lower it in 200 RPM increments until that goes away. You do not need a laptop to take datalogs and tunes. You can use the SD card in the handheld to take datalogs and download GCF, then upload them to your computer.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us