Results 1 to 9 of 9

Thread: Sensors showing yellow caution.

  1. #1

    Post Sensors showing yellow caution.

    Holley Sniper EFI is installed and seems to be running well. My only question at this time is when monitoring sensors my TPS & MAP sensor are always in yellow caution. Sniper EFI has been installed in a fairly stock small block Chevy van.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    17,637

    Default

    The Caution & Warning (background colored) indications can be customized on the touchscreen gauges.
    http://documents.holley.com/techlibrary_199r10751.pdf (Holley 553-108 3.5" TSLCD Instruction Manual - Page 29)
    http://documents.holley.com/techlibrary_199r11031r.pdf (Holley Sniper EFI Instruction Manual - Page 60)
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  3. #3

    Default

    Thanks Danny. Was just wondering if I should be concerned or if there might be a problem.

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    17,637

    Default

    No, it just needs to be programmed to your liking.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  5. #5

    Default

    Thanks again. I'm 71 years young and this is the first EFI that I have ever messed with. Double pumpers are all I know.

  6. #6
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    17,637

    Default

    You're welcome.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  7. #7
    Join Date
    Oct 2017
    Location
    Los Angeles
    Posts
    117

    Default

    Congrats on making the change, and I'm glad it's working for you!

  8. #8

    Default

    Quote Originally Posted by Danny Cabral View Post
    The Caution & Warning (background colored) indications can be customized on the touchscreen gauges.
    http://documents.holley.com/techlibrary_199r10751.pdf (Holley 553-108 3.5" TSLCD Instruction Manual - Page 29)
    http://documents.holley.com/techlibrary_199r11031r.pdf (Holley Sniper EFI Instruction Manual - Page 60)
    I've been trying to get my sensors dialed in (caution colors and RPM max, etc.). I thought I had to do it in the EFI software?

    I downloaded my CGF file to my desktop, edited the values with the EFI software, and then applied the updated to my Sniper EFI. But I guess those settings were not for the on screen gauges for the handheld, as there was no change there. I was unaware I could manage that info right from the handheld, but that PDF looks like it might be for a different product besides the Sniper EFI?

  9. #9
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    17,637

    Default

    Sensors are setup in the EFI software. Gauges are setup in the touchscreen unit.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us