Results 1 to 5 of 5

Thread: Expected shipping date for Part # 70701329-RHKR

  1. #1

    Default Expected shipping date for Part # 70701329-RHKR

    I ordered these back in mid November. They are needed to mate the 2.5" Hooker Blackheart LS swap exhaust to the 3" collector long tube headers. Last week the expected shipping date was 12/11, now it's 12/26. Just curious what is the hold up? I phoned in, but all they can say is they are expected to ship 12/26. Should I expect another two week delay as the 26th approaches? Thanks.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    19,283

    Default

    Our guess is as good as yours.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  3. #3

    Default

    Are the headers and other exhaust products made by Holley/Hooker in the US, or are they sourced from a third party?

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    19,283

    Default

    Holley Performance Products is a manufacturing facility. Some parts are outsourced (i.e, sensor for EFI units), but the end product is assembled at Holley.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  5. #5

    Default

    Quote Originally Posted by 64Skylark View Post
    Are the headers and other exhaust products made by Holley/Hooker in the US, or are they sourced from a third party?
    The BlackHeart headers are made in Bowling Green, KY. Andrew

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us