Results 1 to 2 of 2

Thread: Trying to get more info on a unique original casting holley high rise

  1. #1
    bashfulbunny Guest

    Default Trying to get more info on a unique original casting holley high rise

    Hi guys. I am new to forum and am trying to learn more about my intake. Its a unique original casting that was never put into production. As far as I know there are no numbers on the underside. There is HOLLEY, a snowflake, and Strip Dominator cast into it. Its a high rise thats open on the inside, no chambers. I am curious to know why an intake manifold like this would not have been put into production, or what it was made for. The builder says he acquired it at a swap meet and there is one more identical casting that is in a museum. One person I spoke to says possibly there were 4 like it produced for a specific purpose and were intended to be used on a trial basis by well known drag racers then to be returned to Holley to be destroyed. Thanks for any help. I have contacted Holley a few times but they never get back to me. Here is a link to my setup with the intake. its a chevy 383 stroker. I can provide a better picture of the manifold needed.

    http://i2.photobucket.com/albums/y32...rs/engine1.jpg

  2. #2
    Join Date
    Nov 2009
    Location
    Kentucky
    Posts
    73

    Default

    What you are describing does not ring a bell with me. I would need better photos of it, top and bottom to be able to help you out any further.

    Jay

    1972 Rally Nova
    1972 C-10 Short Step
    1970 Rally Sport Camaro
    1986 Chevy Silverado K10
    2009 F150 Lariat

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us