Results 1 to 1 of 1

Thread: Holley Dual Sync Distributor with a carb setup?

  1. #1

    Default Holley Dual Sync Distributor with a carb setup?

    Is it possible to use a Holley Dual Sync Distributor instead of any other type of distributor, in a non-EFI setup. So with a carb, coil & MSD, with Dual Sync Distributor for crank signal, with no ECU to program. Would this work? The lights should show crank position, and timed in the usual manner. Just no delay adjustment, to work with. Please let me know. Thanks, Max.

    UPDATE: Found out the MSD 6421 will work with the Holley Dual Sync Distributor, then can be used with a carb setup for the crank signal. Hope this info helps anyone with this type of setup.
    Last edited by pvt-maximus; 07-17-2017 at 02:19 PM. Reason: Found answer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us