Results 1 to 2 of 2

Thread: SBF - Holley Dual Sync Distributor

  1. #1

    Default SBF - Holley Dual Sync Distributor

    Has anyone gone from a Ford TFI unit to a Holley Dual Sync Distributor? What's needed for the conversion? How hard is it to install & sync? And is it an improvement over a Ford TFI unit?

  2. #2
    Join Date
    Dec 2009


    Quote Originally Posted by 90notch3 View Post
    Has anyone gone from a Ford TFI unit to a Holley Dual Sync Distributor?
    Yes, a few users on this EFI forum have.

    What's needed for the conversion? How hard is it to install & sync?
    The Holley Dual Sync Distributor is "plug & play" directly into the EFI main harness.

    And is it an improvement over a Ford TFI unit?
    Yes, This is why I no longer advocate using the Ford TFI distributor, because too many Holley EFI users have had problems with it. (This is also corroborated by Holley Tech & one of their EFI Engineers.)

    FYI: Holley EFI now sells their own Dual Sync Hall-Effect distributors (LINK).
    They're a small cap design, "plug & play" with Holley EFI, and no need for a modified Firing Order.
    The crank & cam sensor signals also provide sequential injection capability (MPFI applications).
    It's "plug & play" (into the 10-pin ignition connector on the EFI Main Harness) and requires a CD
    ignition box (Instructions). The MSD 6201 Digital 6A CDI box & 8253 HVC-2 coil are a great match.
    The MSD CD ignition box is wired as shown in the Holley EFI Wiring Manual: (Holley EFI Wiring Manual - Figure 11, Page 20) (Holley EFI Dual Sync Distributor - YouTube Tech Video)
    A blank cap (LINK) is available, if the user decides to convert to Coil-Near-Plug/DIS later (no CDI box).
    Of course, this component can also be used as a crank and/or cam sync/oil pump drive unit.

    The Custom Ignition Parameters (in System Parameters) for the Holley EFI Dual Sync Distributor:
    Ignition Type ............. ― "Custom"
    Crank Sensor Type ..... ― "1 Pulse/Fire"
    Sensor Type .............. ― "Digital Falling"
    Inductive Delay .......... ― "100.0 usec" ( Synchronization info, adjusted per application.)
    Ignition Reference Angle ― "50°" ( Inherent rotor-phasing of this unit.)
    Cam Sensor Type ........ ― "Single Pulse" ( "Not Used" for TBI, unless CNP ignition.)
    Sensor Type .............. ― "Digital Falling"
    Output Setup Type ..... ― "Points Output" ( CDI box ground trigger.)
    Dwell Time ................. ― "2.0 msec" ( Do not set this to 1.5 msec!)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us