Yes, of course it does. Click on the datalog and use the arrow keys to scroll through it.
|Quick Datalogger Information:
Always provide data, not just symptoms. Is the AFR & ignition timing optimized? Overlay the datalog onto your Global File.
Ensure the Target A/F Ratio table is properly programmed for your engine. Ensure the ECU is "Learning" (Learn Table LINK).
Scroll through the datalog to the problem area. Then look exactly where this happens on the Base Fuel & Timing Tables.
Scrutinize RPM, MAP, TPS, CTS, IAC, Target AFR, AFR Left, CL Comp, Ignition Timing, Duty Cycle, Fuel Pressure & Battery.
I find the most helpful datalog function, is overlaying the datalog on your Global File.
I'm in the habit of using the datalog Overlay feature every time I review a datalog.
Click on "Datalog" (on the top Toolbar), "Activate Overlay", then "Open Data Log".
You can literally "playback" a recorded event, and watch it as it happened on any screen.
Minimize (shrink) the datalog window, and move it to the bottom of any Global Folder screen.
Then click & scroll anywhere on the datalog, and watch it playback on your Global Folder (EFI software).
http://documents.holley.com/techlibr...9r10543rev.pdf (Holley EFI Datalogger Instructions)
http://forums.holley.com/showthread....s-amp-Datalogs (Datalog & System Log Information - Read "NOTES")
https://www.youtube.com/watch?v=iqHO...C6FEA0BB99AF17 (How To Record & Email A Datalog)
http://forums.holley.com/showthread....7531#post77531 (Closed Loop Datalog Tuning - Posts #2, #4 & #6)
May God's grace bless you in the Lord Jesus Christ.
'78 BRONCO: 508" stroker, TFS heads, Dominator MPFI & DIS, cold air induction, dual 3" exhaust/Magnaflow mufflers, 100HP progressive dry direct-port NOS, A/C, Lentech Strip Terminator wide-ratio AOD, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, custom traction bars, 4" lift, 35" mud tires