Results 1 to 3 of 3

Thread: What hand held option to choose??

  1. #1

    Default What hand held option to choose??

    Hi. I will install an Avenger EFI 550-400 system on my CSB 350 with a cam having following values:

    Hydraulic roller tappet
    Crankshaft Duration at Lash Point (degrees) = I: 336, E: 336
    Crankshaft Duration at.050" Tappet Lift (degrees) = I: 235, E: 235
    Maximum Lift with 1.5:1 Rocker Ratio = I:. 480", E:.480"
    Valve Lash = Zero/Zero
    Lobe Centerlines (degrees) = 114

    What option should I choose when I do the set up with the hand held unit? Mild Street or Street-Strip?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,057

    Default

    I'd choose "Mild Street" because the TBI base maps are fairly rich overall.
    This should be a better starting point if your vehicle is mostly street driven.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3

    Default

    Thanks Danny. I guess I can change this if needed later on, but I will take your good advice.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us