Results 1 to 3 of 3

Thread: NOS Jetting - 200 Straight Six

  1. #1

    Default NOS Jetting - 200 Straight Six

    I finally finished installing my wet nitrous system on my Ford 200ci tri-carburetor straight six. So far, I've tested it with 3 nitrous Foggers mounted at the base of the carburetor adapters with 20, 24 jets @ 10 psi fuel pressure. This setup works fine, I was told that it's good for 45 HP. I think it may be considerably less, since I'm using 1 Fogger per 2 cylinders. My goal is to step it up to 60 HP, then 75 HP, then finally 100 HP. What would be the jetting to accomplish this?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    12,929

    Default

    https://www.holley.com/document/tech...ech_info_2.pdf (NOS Tuning Technical Information - "6 Cylinder Sportsman Fogger Carbureted", See Page 6)
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, Dominator MPFI & DIS, cold air induction, dual 3" exhaust/Magnaflow mufflers, 100HP progressive dry direct-port NOS, A/C, Lentech Strip Terminator wide-ratio AOD, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, custom traction bars, 4" lift, 35" mud tires

  3. #3

    Default

    I see that 18, 18 will give a 75 shot with 6 Foggers, will it also give a 75 shot for only 3 Foggers? I guess my real question is, will 1 Fogger per 2 cylinders create the same amount of power as 1 Fogger per cylinder? https://www.facebook.com/photo.php?f...type=3&theater

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us