Results 1 to 3 of 3

Thread: Avenger ECU and harness?

  1. #1

    Default Avenger ECU and harness?

    Any outlook if the Avenger EFI will be available as a ECU/Harness combo? I already have a TPI based motor, and would love to just bolt on the Avenger as it has all the basics I need, fueling, timing and supercharged boost control.

  2. #2


    The Avenger is intended for non-forced induction systems. It won't allow you to get into the parameters to use a 2 bar MAP sensor. For a forced induction engine, you need to get into the ignition timing tables to make sure it is what YOUR engine needs. As well as make sure the target A/F ratios are what you need.

    You'd want the laptop programmable HP version. It has the same self-tuning fuel strategy that makes the tuning a lot easier, but will allow you to properly tune the ignition tables and target A/F tables as well.

  3. #3


    Thank you Doug F, I didnt realize the differences in the two. They werent quite clear to me.
    HP efi it is

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us