Tweet
Can anybody advise if there is indeed enough harness length to get from the Holley Dual Sync Distributor to the ignition harness plug in the rear of the engine? It looks to be very short in the photos. Thank you!
-
-
That's not even a Ford 351W distributor pictured. I'm sure it is longer (just like the Ford TFI harness is).May God's grace bless you in the Lord Jesus Christ.
'92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, Eagle 3.470" forged steel crankshaft & H-beam rods, Wiseco 4.200" forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232°-244° duration/.623" lift/114° LSA H/R camshaft, Trick Flow R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes SS dual 2.5" exhaust, SS off-road X-pipe, SS shorty headers, OEM smog pump converted vacuum pump, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, highly modified Ford 4R70W transmission, FTI 9.5"/3000 stall/triple disc TCC, B&M Hammer shifter, Stifflers trans crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.73 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires. -
I was hoping so, I did not want to have to lengthen a brand new piece! :)Comment
-
The harness is plenty long enough. I plan to run mine under the throttle body on my Air-Gap manifold small block Ford. Holley uses a GM distributor for all the pictures, I think. Caused me a lot of worry earlier, too.Comment
-
Yes, it sure is.Originally posted by longezo320 View Post
Yes they do...I don't like that either.Holley uses a GM distributor for all the pictures, I think.May God's grace bless you in the Lord Jesus Christ.
'92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, Eagle 3.470" forged steel crankshaft & H-beam rods, Wiseco 4.200" forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232°-244° duration/.623" lift/114° LSA H/R camshaft, Trick Flow R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes SS dual 2.5" exhaust, SS off-road X-pipe, SS shorty headers, OEM smog pump converted vacuum pump, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, highly modified Ford 4R70W transmission, FTI 9.5"/3000 stall/triple disc TCC, B&M Hammer shifter, Stifflers trans crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.73 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.Comment
-
-
Comment