Results 1 to 4 of 4

Thread: Supercharger with Terminator EFI?

  1. #1

    Default Supercharger with Terminator EFI?

    Hi, I would like to know if my idea will work. Motor is 396" BBC with oval port steel heads around 8.75:1 CR. I would like to use either a 177 or 174 polished supercharger. This will be a street deal, so should I go with PTFE rotors or not? I will also be using a 4L80E transmission, so I would like the EFI ECU to control the transmission too. Fuel tank already has a GPA-6 pump in it (400 liters per hour). Thought? Recommended parts? Thanks, Gary Woods

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    18,657

    Default

    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  3. #3

    Default

    Thanks, I did see the first thread. So, I should be good with purchasing a Terminator EFI 4 BBL Kit with Transmission Control 555-407 then adding a 2 bar MAP sensor? I understand that the HP level is 500 HP, which I would guess I might be getting close if not going over engine. Probably makes around 360-385 NA. Is there a better/safer route to go using EFI or should I just stick a carb on it?

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    18,657

    Default

    So purchase the Terminator EFI Kit with transmission control (Dominator ECU). This will require laptop EFI software programming.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us