Results 1 to 5 of 5

Thread: Replacement injector connector for early 2D Pro-Jection.

  1. #1

    Default Replacement injector connector for early 2D Pro-Jection.

    Does anyone know a source for the proper connector on the harness side for an early 2D Pro-Jection? It's a 4-pin connector. I can't find it in the Holley parts list, or an outside vendor. Thanks!

  2. #2


    I bet you're going to have to resort to eBay.
    Last edited by 440roadrunner; 11-28-2016 at 11:29 AM.

  3. #3


    Yep, I looked there and couldn't find just the connector. It's not a basic Weather-Pack or Deutsch style connector. I might just convert it over. Any ideas on what wires go where?

  4. #4
    Join Date
    Dec 2009


    Quote Originally Posted by ironcurtain View Post
    I might just convert it over. Any ideas on what wires go where?
    It doesn't matter. If you're just replacing the wire connector, you'll pin the wires the same way.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  5. #5


    I think I found it. Looks like a Metri-Pack.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us