Results 1 to 8 of 8

Thread: WBO2 sensor placement?

  1. #1

    Default WBO2 sensor placement?

    On the Sniper EFI, where is the best place to put the WBO2 sensor? I've looked through the Sniper EFI instructions and there is no mention about the WBO2 placement. I'm assuming it would be similar to FiTech's instructions. I would prefer to drill into the exhaust and not the header collector. My plans are to use the passenger side about 2" behind where the header & exhaust bolt up, but on the exhaust side, and at about a 10° angle.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    20,128

    Default

    Quote Originally Posted by caverman View Post
    I would prefer to drill into the exhaust and not the header collector. My plans are to use the passenger side about 2" behind where the header & exhaust bolt up, but on the exhaust side, and at about a 10° angle.
    Correct, I wouldn't locate the WBO2 sensor in the header collector. Several inches downstream of the header collector is a good location.
    http://documents.holley.com/199r11193.pdf (Holley Sniper EFI Quick Start Manual - Step #7, Page 8)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3
    Join Date
    Nov 2016
    Location
    St Louis
    Posts
    15

    Default

    Danny, I put my WBO2 sensor about 2 inches before the bolt flange, instead of after (sensor is on the header). I erroneously thought the "collector" was the point on the header where the pipes came together, not the bolt flange. This would be about 4-5 inches forward of caverman's suggestion. Should I move it?

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    20,128

    Default

    I'd have to see a picture of your header (merge) collector/WBO2 sensor location. I consider THIS a bad location.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  5. #5
    Join Date
    Nov 2016
    Location
    St Louis
    Posts
    15

    Default

    Looks close to your example to me:

    Click image for larger version. 

Name:	WBO2_placement.jpg 
Views:	289 
Size:	73.0 KB 
ID:	1922

  6. #6
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    20,128

    Default

    Yeah, the WBO2 sensor probe is right in front of one primary tube. It would be better located after the collector flange.
    http://documents.holley.com/199r11193.pdf (Holley Sniper EFI Quick Start Manual - Step #7, Page 8)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  7. #7
    Join Date
    Nov 2016
    Location
    St Louis
    Posts
    15

    Default

    Thanks for your help Danny! FYI: When viewing A/F Ratio, it did seem to bounce about +/- 0.25 from target.

  8. #8
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    20,128

    Default

    Quote Originally Posted by j_reins View Post
    Thanks for your help Danny!
    You're welcome.

    FYI: When viewing A/F Ratio, it did seem to bounce about +/- 0.25 from target.
    Well, it does fluctuate a little bit at idle.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us