Hi All. I had the NOS 2-stage Window/WOT Switch installed in my 2010 Dodge Viper. I set the number of cylinders to "10" like it should be, but for whatever reason the RPM being displayed are 1/10th of what actual RPM are. This means that with my "Activation RPM" of 3,700 RPM, the engine would need to spin to 37,000 RPM before it activates. My shop found details and was able to set this to "00" instead, and the proper RPM show on the display and the system now activates at the correct RPM.

My question is, why do the RPM displayed/read 1/10th of the actual engine speed when setting up the unit for 10 cylinders? TIA!