Results 1 to 10 of 11

Thread: DIS Ignition

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2014
    Ont. Canada

    Default DIS Ignition

    Hi Danny, Scott. We're working on a buddies car. We are putting a DIS system on it, and we are having an issue with the timing below 2200 RPM jumping around. It will jump (at the crank) 10° ahead at idle. The amount the timing jumps is consistent, but the frequency it happens is not. Once above 2200 RPM it does not jump around.
    It's on a 400 SBC. He's using the Holley 60-2 wheel, with what I believe is a Cherry sensor you recommended he use on another thread. The air gap is at .025", but the sensor is slightly off center. He's also using a EFI Connection cam sync unit:
    We recorded a datalog as well as a System Log. We don't see any missed events in the System Log.
    My first thought was to center the sensor and reduce the air gap a little to eliminate that as a cause.
    Do you know of any other things we should be looking at? Here's a zipped copy of his Global File (V4), datalog & System Log.
    Attached Files Attached Files
    Last edited by 81 TransAm; 10-05-2016 at 08:11 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us