So I have a slight problem. I'm not to sure what I should do for purchasing a new WBO2. The one I have in my car is currently shot, so I thought about buying a new WBO2 sensor that goes along with the Holley controller I have. But for not much more I can get something like this: http://www.aemelectronics.com/?q=pro...ntroller-gauge, which would allow me to see the AFRs for say when I'm just driving around and don't have the computer open. Normally it'd be an easy choice and just go with the newer piece of tech that has a gauge with it, but I saw a post that Danny had posted stating how to install a LC-1 with the Commander 950 Pro. It mentioned something about how the LC-1 responds too fast and that you have to go into the setting and turn it down, which I'm not to sure you can do that with the gauge I have posted. Any suggestions?