Results 1 to 7 of 7

Thread: WBO2 Help

  1. #1

    Default WBO2 Help

    So I have a slight problem. I'm not to sure what I should do for purchasing a new WBO2. The one I have in my car is currently shot, so I thought about buying a new WBO2 sensor that goes along with the Holley controller I have. But for not much more I can get something like this: http://www.aemelectronics.com/?q=pro...ntroller-gauge, which would allow me to see the AFRs for say when I'm just driving around and don't have the computer open. Normally it'd be an easy choice and just go with the newer piece of tech that has a gauge with it, but I saw a post that Danny had posted stating how to install a LC-1 with the Commander 950 Pro. It mentioned something about how the LC-1 responds too fast and that you have to go into the setting and turn it down, which I'm not to sure you can do that with the gauge I have posted. Any suggestions?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    19,283

    Default

    https://www.holley.com/products/fuel.../parts/534-197 (Holley 534-197 C950 WBO2 Sensor Kit - Bosch WBO2 Sensor)
    https://www.holley.com/products/fuel.../parts/534-188 (Holley 534-188 C950 WBO2 Sensor Kit - NTK WBO2 Sensor)
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  3. #3

    Default

    Thank you for the response, but I feel it still doesn't answer my question. Is it worth just buying another another WBO2 sensor for my already existing Holley WBO2 controller, or spend $50 more and get a newer WBO2 controller that also serves as a gauge and comes with a newer WBO2 sensor and if I'd be even possible to use that newer WBO2?

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    19,283

    Default

    Which WBO2 sensor kit do you have now, and is it integrated with the C950 ECU (Closed Loop)?
    http://forums.holley.com/showthread....=1083#post1083 (Related AEM WBO2/C950 Forum Thread)
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  5. #5

    Default

    At the moment, I have this kit: https://www.holley.com/products/fuel.../parts/534-197, which is installed & working with my ECU, but it needs a new WBO2 sensor as this one is currently shot.

  6. #6
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    19,283

    Default

    So contact Holley and purchase a replacement Holley 534-198 WBO2 sensor. And if you want a WBO2 gauge, purchase the Holley 534-200 C950 WBO2 Gauge.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  7. #7

    Default

    I think I was making this more complicated than it had to be. Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us