Results 1 to 3 of 3

Thread: Sequential Injection Phasing

  1. #1

    Default Sequential Injection Phasing

    I've read through all I could find on this, and still have some questions. What does the phasing of the cam sensor (single pulse Hall-Effect) have on the injection? Example: I'm using the 60-2 wheel set on the 11th tooth and have the sensor at about 190° BTDC #1. The car is up & running, is it correct? What difference would it make at 110° or 240°? Should I be using my cam specs to figure it out closer? Does it matter what tooth your using on the crank wheel as 0? Thanks, Russ

  2. #2
    Join Date
    Nov 2013
    Location
    Chicago IL
    Posts
    1,952

    Default

    All the cam sensor does is tell the ECU where TDC Compression Stroke is, so that it can use a Sequential Timing & Fueling Strategy. As long as it falls within a 30° either side of where the instructions say it is supposed to land, it will work just fine. Other than that, it doesn't affect anything else.
    -Scott
    Don't forget to check out progress on my Race Car:
    Project Blasphemy - 8.07 @ 171
    Low 8 Second Street Car

  3. #3
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,914

    Default

    Quote Originally Posted by S2H View Post
    All the cam sensor does is tell the ECU where TDC Compression Stroke is, so that it can use a Sequential Timing & Fueling Strategy.
    Yeah, that sentence says it all. Read this LINK for more information.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us