TERMINATOR LS MPFI KIT 550-609 Injector Setup Questions

[1971camaroguy]

I was trying to setup my Terminator ECU for my engine configuration using the Wizard function on the handheld. When I get to the injector group data, I'm stumped.
I get choices for four groups, but according to my manual, my injectors fall into group 5 which isn't an option. I have the EV1, LS1 injectors. Any ideas?

I also need to add the Speedometer output, but I see no options for that on the handheld. I think I have to add it by plugging in a laptop to the ECU, and set it that way. Any ideas on that?

[Danny Cabral]

I was trying to setup my Terminator ECU for my engine configuration using the Wizard function on the handheld. When I get to the injector group data, I'm stumped.
I get choices for four groups, but according to my manual, my injectors fall into group 5 which isn't an option. I have the EV1, LS1 injectors. Any ideas?

Some fuel injector programming requires access to Engine Parameters, only available with the EFI software (laptop).

I also need to add the Speedometer output, but I see no options for that on the handheld. I think I have to add it by plugging in a laptop to the ECU, and set it that way. Any ideas on that?

http://documents.holley.com/199r10762rev1.pdf (Holley 550-609 Terminator LS MPFI Kit Instructions - Section 22.1.2 Speed Calc, Page 25 & 26)
http://forums.holley.com/showthread....0291#post30291 (Speedometer Information - Dominator ECU)

[1971camaroguy]

Thanks. Yeah, I ended up loading the EFI software on my laptop, and using the LS1 4L60E Global Folder to start, and configured it to my needs.

[72-Monte-LS3]

Hey 1971camaroguy, what software did you have to use for the setup? You have the same system I have, and I believe it's the same ECU as a Dominator 554-114 listed. I looked at the software and there are so many V4, V3 & V2; just not sure since I'm not at this stage yet. I have to get the engine & transmission into the car & all. Just would like to have the software read. I'm sure I'll get more use from using a laptop. Thanks.

[Danny Cabral]

I looked at the software and there are so many V4, V3 & V2; just not sure since I'm not at this stage yet.

First determine which ECU firmware you have, then download that version EFI software for your laptop. The Terminator, HP & Dominator EFI use the same V2, V3 or V4 EFI software.
http://forums.holley.com/showthread....5760#post45760 (EFI Software & ECU Firmware Versions)