Tweet
Hi guys. Just a couple questions. I'm looking at the 142 or a 177 for a SBC going in a '66 C10. Pretty much a weekend driver. Can anyone give me the differences between the two? Such as boost, height or whatever. Pros and Cons of each. Do these blowers have the typical blower whine at idle and cruise speeds? (Yeah, it's going in a cruiser, not a drag car.) Not really interested in putting one in if it's "quiet", but would like something to fit under the hood of the C10. I have HEI, Vintage Air, PS & Alt, and thinking of a March system. 91 octane fuel a must. Any wisdom you'd like to bestow would be most appreciated as well. Thanks, Sam
-
-
Contact Weiand Tech Service (LINK) about all these blower questions.May God's grace bless you in the Lord Jesus Christ.
'92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, Eagle 3.470" forged steel crankshaft & H-beam rods, Wiseco 4.200" forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232°-244° duration/.623" lift/114° LSA H/R camshaft, Trick Flow R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes SS dual 2.5" exhaust, SS off-road X-pipe, SS shorty headers, OEM smog pump converted vacuum pump, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, highly modified Ford 4R70W transmission, FTI 9.5"/3000 stall/triple disc TCC, B&M Hammer shifter, Stifflers trans crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.73 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.
Comment