Results 1 to 2 of 2

Thread: Transducer Setup

  1. #1
    TS1092 Guest

    Default Transducer Setup

    I bought a couple 100psi sensors part# 554-102. To set them up in the system I will be using them with I need to know the offset and gain for the sensors. I know I can figure it out but it would be easier and probably more accurate if I had this info from the manufacturer. If any one know this info it would be appreciated. Thanks.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    17,655

    Default

    The Holley EFI 554-102 sensor has a linear voltage output range of .5 - 4.5 volts (0-100 psi).
    Volts - PSI
    0.50 = 0
    0.77 = 7
    1.03 = 13
    1.30 = 20
    1.57 = 27
    1.83 = 33
    2.10 = 40
    2.37 = 47
    2.63 = 53
    2.90 = 60
    3.17 = 67
    3.43 = 73
    3.70 = 80
    3.97 = 87
    4.23 = 93
    4.50 = 100


    The Holley EFI 554-103 sensor has a linear voltage output range of .5 - 4.5 volts (0-200 psi).
    Volts - PSI
    0.50 = 0
    0.77 = 13
    1.03 = 27
    1.30 = 40
    1.57 = 53
    1.83 = 67
    2.10 = 80
    2.37 = 93
    2.63 = 107
    2.90 = 120
    3.17 = 133
    3.43 = 147
    3.70 = 160
    3.97 = 173
    4.23 = 187
    4.50 = 200
    Last edited by Danny Cabral; 03-28-2011 at 12:25 PM.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us