Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: C950 Base Map for ProCharger BBC

  1. #1

    Default C950 Base Map for ProCharger BBC

    Anyone have a good base map for a 468 BBC with a P1SC ProCharger. 42 lb/hr injectors?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,684

    Default

    Quote Originally Posted by hallass66 View Post
    Anyone have a good base map for a 468 BBC with a P1SC ProCharger. 42 lb/hr injectors?
    You'll most likely need larger fuel injectors.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3

    Default

    I have the 50/50 water/meth, that should help a little.

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,684

    Default

    Quote Originally Posted by hallass66 View Post
    I have the 50/50 water/meth, that should help a little.
    The water/meth injection kit is an air cooler, not a significant octane booster or a fuel (especially in the small amounts it's used in).
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  5. #5

    Default

    I'm going to just order the Holley HP and get bigger injectors. I have a D1SC ProCharger I'm installing also. I only have a in-tank Aeromotive 340 with a Vortech booster pump. I'm trying to make the car as stealth as possible.


    Click image for larger version. 

Name:	20150920_133739.jpg 
Views:	126 
Size:	100.2 KB 
ID:	1539

    Click image for larger version. 

Name:	20151230_171701.jpg 
Views:	129 
Size:	84.6 KB 
ID:	1540

  6. #6
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,684

    Default

    Quote Originally Posted by hallass66 View Post
    I'm going to just order the Holley HP and get bigger injectors.
    You'll be very glad you did.

    I have a D1SC ProCharger I'm installing also.
    I like that ProCharger installation.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  7. #7

    Default

    Help tuning in the future would be greatly appreciated. Any idea of what size injectors I'll need? I'm only looking for around 600 RWHP, if that fuel system will handle it.

  8. #8
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,684

    Default

    Quote Originally Posted by hallass66 View Post
    Any idea of what size injectors I'll need? I'm only looking for around 600 RWHP, if that fuel system will handle it.
    https://www.injector.com/injector_selection_guide.html (Marren Fuel Injection Calculator)
    https://www.holley.com/document/tech...l_injector.pdf (Selecting a Fuel Injector)
    http://www.injectordynamics.com/HPCalculator.html
    (Injector Dynamics BSFC Guidelines)
    https://www.holley.com/products/fuel...ion/injectors/ (Holley EFI Fuel Injectors)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  9. #9

    Default

    Look what came today:

    Click image for larger version. 

Name:	20160525_211548.jpg 
Views:	90 
Size:	64.5 KB 
ID:	1656

  10. #10
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,684

    Default

    That's a great upgrade. Now read all the instruction guides/manuals before installing it!

    EFI Software Help Information/Instructions:
    ‒ On the top Toolbar, click "Help" & "Contents". This opens all Help topics.
    ‒ When navigating the software, click "Help ?", drag it to any parameter and click again.
    ..This automatically opens the definitions for that specific parameter.
    ‒ Tuning information can be read by clicking the F1 key, when you're viewing any screen.
    http://documents.holley.com/techlibrary199r10555rev17.pdf
    (Holley EFI Wiring Manual)
    http://forums.holley.com/showthread....ents-Read-This! (Initial Checks & Adjustments - Read This!)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us