Results 1 to 3 of 3

Thread: HP 750 & Weiand Supercharger

  1. #1

    Question HP 750 & Weiand Supercharger

    I just installed new 750 HP on my SBC with a Weiand supercharger. Setting the air fuel mixture screw as per Holley recommendation. Only one screw has effect on the idle, but I went ahead and set all the screws as described by Holley. The vacuum reading directly from the manifold is 5 inHg steady in park & drive. The AFR is 11.2 to 12.5 and the exhaust smells rich, but no black smoke. The highest vacuum I got playing with A/F mixture screw is 5.5 to 7.5 inHg, and the AFR is 12.3 to 13. Which vacuum reading I deal with, the steadiest or the highest? The power valve on the carb is 10.5, shall I change it to 2.5? What can I do to get AFR mix between 13.5 to 14? Please help. Thanks.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    17,700

    Default

    Quote Originally Posted by mossman View Post
    The highest vacuum I got playing with A/F mixture screw is 5.5 to 7.5 inHg, and the AFR is 12.3 to 13.
    Check the ignition timing advance at idle. Blower (supercharged) engines require more initial timing and less total timing than naturally aspirated engines.
    They also like a short, yet quick ignition advance curve and retarded timing while cranking to start.

    Excessively retarded ignition timing is the most common cause of glowing exhaust headers. Headers glow red because there’s fuel burning inside.
    The two main reasons are a faulty A/F mixture (most likely too rich) and retarded ignition timing; which doesn’t give the fuel enough time to burn
    inside the combustion chamber. Are you sure the ignition timing synchronization is correct (LINK)?
    http://blog.raceology.com/2003/05/10...-debunked.html (Don Terrill, Former NASCAR Engine Builder - Read Myth #7)
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  3. #3

    Default

    Oops sorry, I was in a hurry because the first writing disappeared after writing for about 1/2 hour. OK, Initial timing is 30°, total set at 30° at 3500 RPM.
    Ignition is MSD 6A, distributor is MSD no vacuum advance. Heaviest spring for the advance weight is used. MSD boost retard.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us